Chemical equation
HCl + NaOH → NaCl + H₂O Balanced Equation
Hydrochloric acid reacts with sodium hydroxide to form sodium chloride and water. This acid–base neutralization is already balanced: its smallest whole-number coefficient ratio is 1 : 1 : 1 : 1.
Quick answer
The equation without states is HCl + NaOH → NaCl + H₂O; no extra coefficients are needed. The net ionic equation is , with Na⁺ and Cl⁻ as spectator ions.
| Coefficients | 1 : 1 : 1 : 1 |
|---|---|
| Reaction type | Acid–base neutralization |
| Mole ratio | 1 : 1 : 1 : 1 |
Balanced Equation for HCl + NaOH
The equation needs no added coefficients because the number of atoms of each element is already equal on both sides.
Balanced equation
Balanced equation with states
One mole of HCl reacts with one mole of NaOH to form one mole of sodium chloride and one mole of water. Writing NaOH before HCl does not change the reaction or its 1 : 1 : 1 : 1 coefficient ratio. This is a common example of strong-acid, strong-base neutralization.
Is HCl + NaOH → NaCl + H₂O Already Balanced?
Yes. Each element already has the same number of atoms on both sides, so no coefficient changes are needed.
| Element | Reactants | Products |
|---|---|---|
| H | 2 | 2 |
| Cl | 1 | 1 |
| Na | 1 | 1 |
| O | 1 | 1 |
That means the smallest whole-number coefficients are 1 HCl + 1 NaOH → 1 NaCl + 1 H₂O. Multiplying all four coefficients by the same number would still balance the equation, but 1 : 1 : 1 : 1 is the simplest whole-number ratio.
How to Balance HCl + NaOH
To check this equation, count the atoms of each element on both sides. All four elements already match, so the simplest coefficients are all 1.
Step 1
Write the equation
HCl + NaOH → NaCl + H₂O
Step 2
Count the atoms
Reactants: H = 2, Cl = 1, Na = 1, O = 1. Products: H = 2, Cl = 1, Na = 1, O = 1.
Step 3
Compare both sides
No element has a different atom count on the two sides.
Step 4
Keep the simplest coefficients
No changes are needed. The smallest whole-number ratio is 1 : 1 : 1 : 1.
Common Mistakes in the HCl + NaOH Balanced Equation
This equation is already balanced. These checks help you keep the formulas unchanged and avoid adding unnecessary coefficients.
Keep NaOH together in the molecular equation
Keep NaOH together when writing the molecular equation. You can separate its ions when writing the complete ionic equation, but you should not change its chemical formula to balance atoms.
Do not change subscripts
Only coefficients can change when balancing. H₂O is water, while H₂O₂ is hydrogen peroxide; replacing one formula with the other changes the reaction.
Do not add a 2 to water
HCl and NaOH together already supply 2 H atoms and 1 O atom, exactly enough for one H₂O molecule.
HCl + NaOH Equation with States
For a typical reaction between aqueous hydrochloric acid and sodium hydroxide, the salt remains dissolved as Na⁺ and Cl⁻ ions, and the water formed is liquid.
- (aq)
- Shows that HCl, NaOH, and NaCl are represented in aqueous solution, not as solids.
- (l)
- Liquid water produced by neutralization.
What Type of Reaction Is HCl + NaOH?
HCl + NaOH is primarily an acid–base neutralization reaction: acid + base → salt + water.
| HCl | Acid |
|---|---|
| NaOH | Base |
| NaCl | Salt |
| H₂O | Water |
In aqueous solution, hydrochloric acid supplies H⁺ (a simplified notation for hydrated hydrogen ions), and sodium hydroxide supplies OH⁻. These ions form water. Na⁺ and Cl⁻ remain dissolved as separate ions; NaCl(aq) does not mean a solid precipitate forms.
This reaction is also called double displacement or double replacement in some introductory classifications. Acid–base neutralization is the more specific description of the reaction between H⁺ and OH⁻.
Net Ionic Equation for HCl + NaOH
The net ionic equation is H⁺(aq) + OH⁻(aq) → H₂O(l). To derive it, separate the dissolved strong electrolytes into ions and remove the ions that remain unchanged.
Step 1 — Write the balanced molecular equation
HCl, NaOH, and NaCl are aqueous in this example. The water produced is liquid.
Step 2 — Write the complete ionic equation
Write the dissolved strong electrolytes as their ions: H⁺, Cl⁻, Na⁺, and OH⁻. Keep liquid water together as H₂O(l).
Step 3 — Cancel the spectator ions
Na⁺(aq) and Cl⁻(aq) appear with the same amounts and charges on both sides. Remove them to show only the chemical change.
Spectator ions canceled from the complete ionic equation Ion Why it cancels Na⁺(aq) Unchanged on both sides Cl⁻(aq) Unchanged on both sides Step 4 — Check the net ionic equation
Both sides contain two hydrogen atoms and one oxygen atom. The total electrical charge on the left is +1 − 1 = 0, matching the neutral water on the right.
Hydrogen ions are hydrated in water, so the net ionic equation can also be written using H₃O⁺ instead of H⁺: . Writing H⁺ is the usual shortened form for this aqueous neutralization.
For another aqueous reaction, use the net ionic equation calculator.
Stoichiometric Mole Ratio
The 1 : 1 : 1 : 1 coefficient ratio also gives the mole ratio for HCl, NaOH, NaCl, and H₂O.
Mole ratio
HCl : NaOH : NaCl : H₂O = 1 : 1 : 1 : 1
With enough of each reactant for complete neutralization, 1.00 mol HCl reacts with 1.00 mol NaOH to form 1.00 mol NaCl and 1.00 mol H₂O. These are theoretical amounts from the balanced equation.
If the starting amounts differ, the reactant with fewer moles is used up first because HCl and NaOH react in a 1 : 1 ratio. This ratio is also used in HCl–NaOH acid–base titration calculations.
Worked Example: NaOH as the Limiting Reactant
Suppose you mix 0.100 mol HCl with 0.080 mol NaOH. Assuming the neutralization goes to completion, the 1 : 1 ratio means NaOH runs out first: it uses 0.080 mol HCl to form 0.080 mol NaCl and 0.080 mol water.
- Limiting reactant
- NaOH
- Maximum NaCl produced
- 0.080 mol
- HCl remaining
- 0.020 mol
The remaining HCl is 0.100 − 0.080 = 0.020 mol. Check these amounts in the limiting reactant calculator →
Reactants and Products
The table names each reactant and product and shows its role in the neutralization reaction.
| Side | Formula | Name | Role |
|---|---|---|---|
| Reactant | Hydrochloric acid | Acid | |
| Reactant | Sodium hydroxide | Base | |
| Product | Sodium chloride | Salt | |
| Product | Water | Water |
Related formula pages: NaCl molar mass · H₂O molar mass · H₂O Lewis structure
Use This Equation in Chemistry Calculators
The simplest coefficient ratio is 1 : 1 : 1 : 1. Use these tools to calculate amounts, find the limiting reactant, or balance another reaction.
- Use in Stoichiometry CalculatorStart from the 1:1:1:1 mole ratio.
- Find Limiting ReactantCompare 0.100 mol HCl with 0.080 mol NaOH using the 1:1 ratio.
- Calculate Theoretical YieldCalculate the theoretical mass of NaCl from a known amount of HCl.
- Open Equation BalancerOpen this reaction in the balancer, then enter another equation.
Related Worked Equation Guides
See how a different reaction is balanced, with an explanation of its steps.
Chemistry References
These chemistry textbook sections explain atom conservation, ions in water, and acid–base neutralization.
- OpenStax Chemistry 2e — 4.1 Writing and Balancing Chemical Equations — coefficients, atom conservation, and molecular vs. ionic equations.
- OpenStax Chemistry 2e — 4.2 Classifying Chemical Reactions — acid–base reactions, neutralization, and ions in aqueous solution.
Frequently Asked Questions
What is the balanced equation for HCl and NaOH?
The balanced equation is HCl + NaOH → NaCl + H₂O. In a typical aqueous neutralization, it is written with states as HCl(aq) + NaOH(aq) → NaCl(aq) + H₂O(l).
Is HCl + NaOH → NaCl + H₂O already balanced?
Yes. The equation is already balanced with coefficients 1:1:1:1. Both sides contain 2 H atoms, 1 Cl atom, 1 Na atom, and 1 O atom.
What is the HCl + NaOH equation with states?
The equation with physical states is HCl(aq) + NaOH(aq) → NaCl(aq) + H₂O(l). (aq) means dissolved in water, and (l) means the water is liquid.
What type of reaction is HCl + NaOH?
HCl + NaOH is an acid–base neutralization reaction. It is also called double replacement (or double displacement) in some introductory chemistry courses.
What is the net ionic equation for HCl + NaOH?
The net ionic equation is H⁺(aq) + OH⁻(aq) → H₂O(l). Na⁺ and Cl⁻ are spectator ions that appear unchanged on both sides of the complete ionic equation, so they cancel. The resulting equation has the same atom counts and a total charge of zero on each side.
What is the mole ratio of HCl to NaOH?
The mole ratio of HCl to NaOH is 1:1. One mole of HCl reacts with one mole of NaOH to form one mole of NaCl and one mole of H₂O.